HAI OMNI LT Owner's Manual

Also see for OMNI LT: Owner's manual Installation

Contents

HAI OMNI LT Owner's Manual Manual pdf 15 page image

72 = NIGHTThe NIGHT mode is used when you are asleep and everyone in your household is at home. In the Night mode, your doors,windows, and non-sleeping area (i.e. downstairs) motion detectors are armed. In the Night mode, there is no entry delay. Thealarm system sounder will be activated immediately if any door, window, or non-sleeping area (motion detector) is tripped.3 = AWAYUse the AWAY mode when you leave your house and no one is home. All doors, windows, and motion detectors are armed. Allzones have an Exit Delay so that you will have time to leave and close the door after you arm the system. The system will befully armed after the Exit Delay. There is an Entry Delay on the Entry-Exit zones in the Away mode, so that you will have timeto turn the system off when you return through your door.Note that the Entry Delay only applies if you come in through an Entry-Exit zone. If someone attempts to climb into a window,or if an interior zone is tripped before the Entry-Exit zone, the alarm will be activated immediately. If you do enter through anEntry-Exit zone first, then the other zones are disabled during the Entry Delay, in case you have to cross through another zone toget to your console (an interior motion detector, for example).4 = VACATIONThis mode arms all doors, windows, and interior motion detectors (same as Away mode). There is an Entry Delay on the Entry-Exit zones. Use this mode when you are leaving for a period of days.5 = DAY INST (DAY INSTANT)Functions same as Day mode, however, there is no Entry Delay on any of the security zones. There will be an instant alarm if anyof the zones are violated while in this mode.6 = NIGHT DLY (NIGHT DELAY)Functions same as Night mode, however, there is an Entry Delay on the Entry-Exit zones. Use this mode if you are going to sleepbut a family member is expected home at a later time.Using Shortcut KeysThere are three shortcut keys on the console to arm the system in the Day, Night, and Away security modes, and Off to disarm,without having to go into the security menu.From the top-level display, press one of the shortcut security keys. Enter your code number on the console keypad.The console will beep once and the console LED will be set to red. The top line will display the security mode to indicate thatyou have correctly armed the system. The system will be fully armed after the Exit Delay expires.The programmed Entry Delay is __________ seconds.The programmed Exit Delay is __________ seconds.Quick ArmFor extra convenience, the OmniLT can be armed by simply pressing the DAY, NIGHT, or AWAY button twice, eliminating theneed to enter the code.To quick arm the system in the Away mode, from the top-level display, press:The quick arm feature only works if the alarm system is in the Off mode, and if no alarms are sounding. This feature is disabledwhen the system is shipped. If desired, it can be enabled or disabled at any time - See Set Up Arming, Enable Quick Arm.AWAY AWAY