HAI OMNI LT Owner's Manual

Also see for OMNI LT: Owner's manual Installation

Contents

HAI OMNI LT Owner's Manual Manual pdf 58 page image

50Finally, you are prompted to enter the current date:ENTER DATE:MMDDYYEnter the current date. If the current date is February 8, 2006, enter it as “0 2 0 8 0 6”.Advanced Control Programming (ACP)Your OmniLT can be programmed to do automated control and security functions on a time schedule or in response to an eventoccurring in the system.The OmniLT executes programs:• Once at a certain time on a certain date (One-Time Program)• On a certain date every year (Yearly Program)• Repeatedly (Repeating Programs)• In response to an event (Event Button Programs)You can also conditionalize programs so that they only run under certain circumstances.Each automation "program" is a single step in programming automation in an OmniLT system. Each program must specify whenthat program should execute and an action to be taken. The program may also specify a condition that must be true for theprogram to execute.Each program can be set up to execute at a certain time of day or on the occurrence of a particular event in the system. When thistime or event occurs, the programmed action will be taken if, and only if, the specified condition is also true at that time.The Program menu allows you to add, review, change, and delete automation programs. To enter the Program menu, from theSetup menu, press the 3 (PROG) key.SET UP PROGRAMS1=ADD 2=SHOW 3=DELETE1 = Add ProgramsThe 1 (ADD) key is used to add new automation programs to the system. When you press the 1 (ADD) key, the Edit Programmenu is displayed which allows the various parts of a program to be specified - See Edit Program. You may edit each part of theprogram as specified under Edit Program. Press the ' # ' key at the Edit Program menu to show the newly entered program.Press the ' # ' key again to save the program, or press the ' * ' key to return to the Edit Program menu to cancel entry of the newprogram and return to the Set Up Programs menu.Once the new program is entered, the display will return to the Set Up Programs menu.2 = Show ProgramsThe 2 (SHOW) key is used to review, edit, and delete existing programs. From the Set Up Program menu, press the 2 (SHOW)key. The display prompts you to specify which program to be reviewed.1=CTRL 2=SEC 3=BTTN4=ALL 5=TEMP #=EVERYMenu 1 - Programs for a particular control unit numberMenu 2 - All Security related programsMenu 3 - Programs for a particular macro or event buttonMenu 4 - Programs for All On/Off functionsMenu 5 - Programs for a particular Temperature zoneMenu # - Displays every program