10General Information2.1.3 Change instrument labelsSeveral safety labels (3 in the analytical section) are applied to theinstrument. If necessary, apply the correct language label over theexisting safety labels.2.2 Product overviewThe AMTAX sc (Figure 3, Figure 4) measures the ammonium ionspresent in treated aqueous solutions (waste water, process waterand surface water). The measured value is displayed in mg/LNH 4 -N on the controller. The AMTAX sc must be used incombination with the sc1000 controller. The sc1000 controller isused to configure, power and output the measured values.Conversion formula: NH 4 -N : NH 4+ = 1 : 1.288The AMTAX sc can operate using single or dual channel modes.Operation with the Filter Probe sc is single channel only. The scanalyzer can be converted from a single channel operation to dualchannel operation. Contact the manufacturer for more information.This symbol, when noted on the product, identifies a risk of chemical harm and indicates that only individualsqualified and trained to work with chemicals should handle chemicals or perform maintenance on chemical deliverysystems associated with the equipment.This symbol, when noted on the product, indicated the presence of devices sensitive to Electro-static Discharge(ESD) and indicated that care must be taken to prevent damage with the equipment.When carrying or transporting the instrument/instrument components and if the total weight is more than 18 kg,make sure that suitable lifting equipment is used and/or that the instrument/instrument components are carried by2 people.Danger! Do not reach into the device!18-32 kg (39.7-70.5 lbs)
