Harman Stove Company P35i Owner's Manual

Harman Stove Company P35i Owner's Manual Manual pdf 22 page image

22 Pellets or Corn/Pellet Mixture Only 3-90-775 Save These InstructionsP35i Fireplace InsertI. Optional Log KitCeramic log #3-40-674099Log Bracket Kit #1-00-774401Remove the two bolts from the air manifold below theglass opening. Install the log bracket using the sametwo bolts. Place the log onto the bracket with thesmaller twigs pointing back toward the burn pot.Please Note; The decorative log is fragile and must behandled with care. The abrasive nature of pellet ashmay cause the log to deteriorate. Therefore, the log isnot covered under the appliance warranty.J. Optional Trim Kit- #1-00-00775-*The trim kit option includes a door frame and an ashlip trim. To install the ash lip trim, simply slide it overthe ash lip from the front. You can secure it with a fewdabs of high temperature silicone, if desired. To installthe door trim, follow these steps.• Remove the door latchby loosening the smallset-screw and tappingout the roll pin.• Remove the doorby lifting it off of thehinges. Lay it, facedown on a flat surface.• Locate and drill thedimpled holes in eachcorner of the door,using the provided drillbit.• Install the trim frame withthe threaded studs throughthe holes in the door, andsecure it with the four nutsprovided in the kit.Set-screwRoll PinK. Service Rail Kit- #1-00-774125The Service Rail Kit is used to support the insertbody while it is pulled out of the mounting frame forcleaning or service. Used only with a raised hearthinstallation, it is easily adjustable to a height rangeof 4" to 14". Assemble the rail kit using the providedinstructions. After removing the Ash Pan cover, therails attach to the mounting frame with four bolts.There are even stop bolts on the rails to preventaccidental roll-off.* Trim finish suffix; 4=Gold,7=Brushed Stainless, 8=Bright NickelTwo bolts on each sidesecure the rail kit to themounting frame.