4 Pellets or Corn/Pellet Mixture Only 3-90-775 Save These InstructionsP35i Fireplace InsertHopper Capacity-#1-70-774235 (23½ ")1 Listing and Code ApprovalsA. Appliance CertificationModel: P35i InsertLaboratory: OMNI-Test Laboratories, Inc.Report No. 135-S-25-6.2Type: Solid Fuel Room Heater / FireplaceInsert.Standard(s): ASTM E1509-04, ULC S628-93 andULC/ORD C1482-M1990This appliance is also approved for installation ina shop.B. Mobile Home ApprovedThis appliance is approved for Installation in mobile/manufactured homes. The structural integrity of themobile home floor, ceiling and walls must be main-tained. The appliance must be properly grounded tothe frame of the mobile home, and must never beinstalled in a room designated for sleeping. The unitmust have provisions for an outside air source wheninstalled in a mobile home.C. Glass SpecificationsD. Electrical RatingThis appliance is equipped with 5mm ceramic glass.Replace glass only with 5mm ceramic glass. Pleasecontact your dealer for replacement glass if needed.115 VAC, 60 Hz,3.6 Amps (Start-up); avg. 1.5 Amps (Normal Run)E. BTU & Efficiency SpecificationsParticulate EmissionsRating:*BTU Input:Heating Capacity:Hopper Capacity-#1-70-774195 (19½ ")Fuel:Shipping Weight:41 lbs.Wood pellets / Corn†289 lbs.1,500 sq. ft.0 or 6,000 - 35,000 / hrExempt from EPA per40 CFR, Method 28A* BTU input will vary, depending on the type offuel you use in your stove. Moisture and ashcontent can affect performance.† Corn is approved for burning only when mixedwith wood pellets.62 lbs.