Important Instructions for the IntelliStation R Pro (Type 6851)This Field Replacement Unit (FRU) comes with the IBM IntelliStation R Pro (Type6851) BIOS Update diskette. Use this diskette only with the IntelliStation R Pro(Type 6851) Models 10x, 11x, 12x, and 13x. Do not use this diskette on any othersystem.Standard BIOS code is installed on this replacement system board. You mustinitialize this replacement system board for the IntelliStation R Pro (Type 6851)systems. Failure to initialize the system board can cause the IntelliStation R Pro tomalfunction.Before you service an IntelliStation R Pro (Type 6851) system, obtain the latest levelof the BIOS flash code from the following Web site. At the Web site, perform asearch on the keywords “IntelliStation BIOS″.http://www.pc.ibm.com/us/files.htmlIf Web access is not available to you, use the IBM IntelliStation R Pro (Type 6851)BIOS Update diskette provided with this FRU.Initializing the system boardTo initialize he new system board, do the following:1. After you replace the system board, insert the IBM IntelliStation R Pro (Type6851) BIOS Update diskette and turn on the system.2. Resolve any configuration or POST startup error messages by following theon-screen instructions.3. Select 1-Update POST/BIOS from the menu that contains various flash updateoptions.4. When prompted as to whether you want to move the current code to abackup location within the flash ROM, select Y.5. When prompted as to whether you want to save the current code to adiskette, select N.6. When prompted to choose a language, select a language (from 1 to 5); thenpress Enter to accept your choice.Note: If you receive the message ″The POST/BIOS code in the system is anewer version than on the diskette″, disregard it and press Enter tocontinue.7. After the BIOS flash update is complete, remove the IntelliStation R Pro (Type6851) BIOS Update diskette from the drive; then, press Enter to restart thesystem.8. When the message ″Press F1 for Configuration/Setup″ displays on theIntelliStation logo screen, press F19. From the Configuration/Setup Utility menu, highlight Load Default Settings;then, press Enter.10. Press Enter again to continue.11. Set the correct date and time.12. Highlight Exit Setup; then, press Enter.13. Highlight Yes, save and exit the Setup Utility; then, press Enter.Initialization of the new system board is complete.FRU information (service only) 117
