Error Code/Symptom FRU/Action206-XXX-000 (Failed Diskette Drive test) 1. Try test with another diskette2. Cable3. Diskette Drive4. System Board215-XXX-000 (Failed IDE CD-ROM test) 1. CD-ROM Drive Cables2. CD-ROM Drive3. System Board217-198-XXX (Could not establish driveparameters) 1. Check cable and termination2. SCSI backplane3. Fixed disk217-XXX-000 (Failed Fixed Disk test)Note: If RAID is configured, the fixed disknumber refers to the RAID logical array1. Fixed Disk 12. System Board217-XXX-001 (Failed BIOS Fixed Disk test)Note: If RAID is configured, the fixed disknumber refers to the RAID logical array1. Fixed Disk 22. System Board264-XXX-0NN (Failed Tape Drive test) 1. Tape Cartridge, if user executed the Read/Write Tape Drive test(failure code of XXX = 256)2. SCSI or Power Cable connected to tape drive with SCSI ID NN.3. Tape Drive with SCSI ID NN. (Refer to the Help and ServiceInformation appendix of the tape drive’s User Guide.)4. System Board or SCSI Controller. (Run SCSI Controller Diagnosticto determine if the SCSI bus is functioning properly.)264-XXX-999 (Errors on multiple tapedrives, see error text for more info) 1. See error messages/text in the PC Doctor error log for detailedinformation on each individual tape drive error.301-XXX-000 (Failed Keyboard test) 1. Keyboard2. System Board405-XXX-000 (Failed Ethernet test oncontroller on the System Board) 1. Verify that Ethernet is not disabled in BIOS.2. System Board405-XXX-A0N (Failed Ethernet test onadapter in slot A) 1. For A=0, system board2. For A >0, adapter in PCI slot A415-XXX-000 (Failed Modem test) 1. CableNote: Ensure modem is present and attached toserver/workstation.2. Modem3. System BoardError symptomsError Symptom FRU/ActionCD is not working properly. 1. Clean the CD.2. Run CD-ROM diagnostics3. CD-ROM DriveSymptom-to-FRU index 125
