Chapter 6. Management 3217. Save the settings and restart the ASM. The RSA2 adapter is restarted andthe new settings are enabled.6.2.3 Web interfaceThrough port 80, the RSA II enables the embedded Web server daemon, whichyou use to access the Web interface after you assigned the correct LAN interfacesettings as described in 6.2.2, “RSA LAN configuration in BIOS” on page 319.As described in that section, the adapter is configured by default to look for aDHCP server to obtain an IP address, and if none is available, to use the defaultIP address of:192.168.70.125You can view the assigned address from the BIOS in the Advanced Settingsmenu.To access the RSA II Web interface:1. Open a supported browser. Enable the use of a Java™ Plugin, if you want touse remote console features, as described in 6.2.4, “Remote console andmedia” on page 324.Use the default user ID and password (see Figure 6-15 on page 322):– User ID: USERID (all uppercase)– Password: PASSW0RD (all uppercase, where 0 is the number zero)Tip: This process can take up to 20 seconds before you can ping the newIP address of the RSA II adapter.
