Chapter 6. Management 3696.9.1 Updating DSA PrebootThis section describes how easily DSA Preboot can be updated. DownloadDSA Preboot from:http://www.ibm.com/support/docview.wss?uid=psg1MIGR-5072294The DSA can be updated by: Windows operating system Linux operation system (not VMware ESX 3i embedded) Bootable CD or mounted ISO image in the RSA II Web interface USB memory key, if it is attached locally at the server or mounted in theremote control windowUpdate by using the ISO imageAfter you download the ISO file, you may burn it to a CD-ROM or mount it at theremote control feature in the RSA II Web interface, described in 6.2.4, “Remoteconsole and media” on page 324.To update the DSA Preboot:1. Mount the ISO image or created CD-ROM in the RSA II Web interface remotecontrol window, or insert the CD-ROM in the CD-ROM drive of your server.2. Boot the server to the CD-ROM drive.The initial sequence detects the internal 4 GB USB flash device, andaddresses it by SCSI emulation for USB Mass Storage support, shown inExample 6-2.Example 6-2 DSA Preboot boot initialization sequence...USB Mass Storage support registered.Vendor: ST Model: ST72682 Rev. 2.10Type: Direct Access ANSI SCSI revision: 02...3. The DSA Preboot flash update menu is displayed, shown in Example 6-3 onpage 370.Note: The DSA Preboot updates stand-alone systems and all nodes that arepartitioned to a multinode system. See Chapter 4, “Multinode hardwareconfigurations” on page 195.
