IBM RS6000 - 7026 - H70 Service Manual

Also see for RS/6000 7025 F50 Series: User guide Service guide Service guide

Table 3-5 (Page 10 of 10). Firmware Checkpoints.Checkpoint Description Action/Possible Failing FRUE213 Initial memory configuration. 1. Replace the memory card (Seenotes on 3-1.)2. Replace the System Board.See the note on 3-29.E214 Memory test. Replace the memory card (Seenotes on 3-1.) See the note on3-29.E216 Copy ROS into RAM. SetupTranslation and C environment.Replace the memory card (Seenotes on 3-1.) See the note on3-29.E220 Final memory configuration. Go to “MAP 1540: MinimumConfiguration” on page 2-17.E299 Start C code execution. See the note on 3-29.E3xx Memory test See “Memory Test Hang Problem”on page 3-42.E440 Validate NVRAM, initialize partitionsas needed.1. Verify that the system andService Processor firmwarelevels are at the current releaselevels, update as necessary.2. Replace the memory card (Seenotes on 3-1.) See the note on3-29.E441 Generate /options node NVRAMconfiguration variable properties.1. Verify that the system andService Processor firmwarelevels are at the current releaselevels, update as necessary.2. Replace the memory card (Seenotes on 3-1.) See the note on3-29.E442 Validate NVRAM partitions. 1. Verify that the system andService Processor firmwarelevels are at the current releaselevels, update as necessary.2. Replace the memory card (Seenotes on 3-1.) See the note on3-29.E443 Generate NVRAM configurationvariable dictionary words.Suspect a system firmware problemif this problem persists. Verify thatthe system firmware is at thecurrent release level, update asnecessary. See the note on 3-29.Chapter 3. Error Code to FRU Index 3-41