IBM RS6000 - 7026 - H70 Service Manual

Also see for RS/6000 7025 F50 Series: User guide Service guide Service guide

doneretry: send "A/" # Repeat the previous command.# Expect a connection response.expect "16\r" or "15\r" or "14\r" or "12\r" or "1ð\r" or "5\r" or "1\r" busy "7\r"timeout 6ðdonedisconnect:delay 2 # Separate from previous data.send "+++" # Assure command mode.delay 2 # Allow mode switching delay.send "ATHðT\r" # Set modem switch-hook down# (i.e., hang up).ignore "ð\r" or "OK\r" timeout 2 # Ignore modem response.send "ATEðQ1\r" # Initialize modem: Echo OFF,# Disable responses.ignore "ð\r" timeout 1donecondin: send "AT&FQðT\r" # Reset to factory defaults.ignore "ð\r" or "OK\r\n" timeout 2 # Ignore modem response.send "ATEðT\r" # Initialize modem: Echo OFF,expect "ð\r" or "OK\r\n" timeout 2 # Enable responses (Numeric),send "ATQðVðXðT\r" # Limit response codes.expect "ð\r" timeout 2 # Confirm commands successful.send "ATSð=2\r" # Set AutoAnswer ONexpect "ð\r" timeout 2 # Confirm command successful.send "AT&C1&D2\r" # Detect carrier and DTR.expect "ð\r" timeout 2 # Confirm command successful.donewaitcall: ignore "2\r" timeout 1 # Ignore first ring.expect "2\r" timeout 1ð # Pick up second ring# or timeout.# Expect a connection response.expect "16\r" or "15\r" or "14\r" or "12\r" or "1ð\r" or "5\r" or "1\r"timeout 6ðdonepage: send "ATDT%N,,,,%R;\r" # %N = pager call center number# Add enough commas to wait for# time to enter paging number.# %R = paging number# Confirm successful command.expect "ð\r" timeout 6ðdelay 2 # Wait before hanging up.send "ATHðT\r" # Hang up.expect "ð\r" timeout 2 # Confirm successful command.doneripo: send "AT&FQðT\r" # Reset to factory defaults.ignore "ð\r" or "OK\r\n" timeout 2 # Ignore modem response.send "ATEðT\r" # Initialize modem: Echo OFF,expect "ð\r" or "OK\r\n" timeout 2 # Enable responses (Numeric),send "ATQðVðXðT\r" # Limit response codes.expect "ð\r" timeout 2 # Confirm commands successful.send "ATSð=ð\r" # Set AutoAnswer OFFexpect "ð\r" timeout 2 # Confirm command successful.send "AT&C1&D2\r" # Detect carrier and DTR.expect "ð\r" timeout 2 # Confirm command successful.done # RI Power On enabled.error: # Handle unexpected modem# responses.D-14 Service Guide