IBM RS6000 - 7026 - H70 Service Manual

Also see for RS/6000 7025 F50 Series: User guide Service guide Service guide

4. Does your modem respond to:a. AT&F reset command, orb. AT&Fn reset commands, where n can be 0, 1, etc.?If AT&F, configuration file modem_f.cfg is recommended.If AT&Fn, configuration file modem_f0.cfg or modem_f1.cfg is recommended,depending on which provides the hardware flow control profile.5. Selection is complete. If you find it necessary to adjust any of theseconfiguration files, do so with reference to the manual that came with yourmodem.1 Choose settings that enable hardware flow control and respond to DTR.Examples*Ring interrupt only on first ring.Customizing the Modem Configuration FilesYou can create your own modem configuration file(s) or modify the samplesprovided. After you customize your modem configuration files, you MUST accessthem via the Configure Remote Maintenance Policy Service Aid rather than from theService Processor menus.Modem Setup Z Setup Z0(Rare)Setup F Setup F0 Setup F1AT&T DataPort 2001 * XBocamodem 1440E XHayes Smart Modem 300 XIBM 5841 XIBM 5843 XIBM 7851 XIBM 7852-010 XIBM 7855 XUSRobotics33.6K SportsterXZoom V.32 X1 Some older modems do not respond to the commands Xð or &R1. You should edit out thesecommands from the modem configuration file if yours is such a modem. See your modem manual formore information.Appendix D. Modem Configurations D-3