Chapter 9. Management 525Example 9-16 Output from command MegaCli -CfgLDAdd -R1[252:1,252:2] -a0Adapter 0: Created VD 1Adapter 0: Configured the Adapter!!Exit Code: 0x003. The virtual drive is successfully created.Additional command examplesThe following command examples use the MegaCli command: Display help for MegaCLIMegaCli –h|–Help|? Display controller properties for all installed adaptersMegaCli -AdpAllinfo -aALL Save configuration on the controllerMegaCli -CfgSave -f c:\saveconfig.txt -a0 Restore configuration data from fileMegaCli -CfgRestore -f c:\saveconfig.txt -a0 Display virtual drive information for all VD on all adaptersMegaCli -LDInfo -Lall -aALL Display virtual drive and physical drive information for all adaptersMegaCli -LDPDInfo -aAll Display number of virtual drives for all adaptersMegaCli –LDGetNum -aALL Display list of physical devices for all adaptersMegaCli –PDList -aAll9.14 Serial over LANSerial over LAN (SoL) is a mechanism that enables the input and output of the serial port of amanaged system to be redirected on the network over TCP/IP. SoL provides a means tomanage servers remotely by using a command-line interface (CLI) over a Telnet or SecureShell (SSH) connection.SoL can give you remote access to the UEFI/BIOS and power-on self test (POST) messages.Using SoL, you can log in to the machine remotely. It can give you access to special operatingsystem functions during boot.In the x3850 X5 and x3690 X5, the serial port is shared with the integrated managementmodule (IMM). The IMM can take control of the shared serial port to perform text consoleredirection and to redirect serial traffic, using Serial over LAN (SoL).In the HX5, the Advanced Management Module (AMM) CLI provides access to the textconsole command prompt through the SoL connection.
