104 BASIC OPERATION ReceivingMake sure a charged battery pack or alkaline batteries are in-stalled. (pgs. 1, 46)q Push [POWER] for 2 sec. to turn power ON.w Push [↕] to set the desired audio level.• One of the LCDs shows the volume level while setting. See thenext page for details.e Push [↔] to select an operating band. (p. 7)r Rotate [DIAL] to set an operating frequency. (p. 8)t Set the squelch level.• While pushing [SQL], rotate [DIAL].• The first click of [DIAL] indicates the current squelch level.• “LEVEL1” is loose squelch and “LEVEL9” is tight squelch.• “AUTO” indicates automatic level adjustment with a noise pulsecount system.• Push and hold [SQL] to open the squelch manually. (default be-haviour; p. 41)y When a signal is received:➥ Squelch opens and audio is emitted from the speaker.➥ The S indicators show the relative signal strength.➥ The busy indicator appears when receiving a signal or when thesquelch is open.q Power switchw Set volumee Select band t Push for settingthe squelch(Push to monitor)r Set frequencyt Set the squelchlevelFor non-U.S.A. versionsIf the display mode selection is set as ‘manual’ (p. 43) withthe color LCD ON, the receiver may not be able to turn it-self OFF when the battery becomes exhausted.Replace the battery and turn power OFF in this case.For U.S.A. versionThe U.S.A. version automatically turns itself OFF when thereceiver detects that battery replacement is necessary. Re-place the battery or charge the battery pack in this case.