Memory bank selectionThe receiver has 400 memory channels in 8 banks (A–H) forstorage of often-used frequencies.q Select memory mode with [V/M].w Rotate [DIAL] while pushing [FUNC] to select the desiredmemory banks.e Rotate [DIAL] to select the desired memory channel. Memory clearUnwanted memory channels can be cleared (erased). Beforeclearing a memory channel, make sure it is no longer neededas cleared memories cannot be recalled.q Select memory mode with [V/M].w Set the memory channel to be cleared with [DIAL].• Rotate [DIAL] while pushing [FUNC] to select a memory bank(A–H) or programmed scan edge channel.e Select VFO mode with [V/M] and push [V/M] for 1 sec. toindicate the selected memory channel.• Do not hold [V/M] for more than 2 sec., otherwise the selectedmemory channel will be overwritten.r Push [FUNC] + [V/M] for 2 sec. to clear.• 3 beeps sound, then the frequency is cleared.t Push [MODE] to return to VFO mode.FM FM FMMemory bank A Memory bank G Memory bank H165 MEMORY CHANNELSFM FM FMS1 3 5 7 9VOLFM146.340.000M:A03TS 15.0S1 3 5 7 9VOLFM146.010.000TS 15.0S1 3 5 7 9VOLFM146.340.000M:A03TS 15.0S1 3 5 7 9VOL. .M:A03TS .MODE SETSelect memorychannelfor 2 sec.+for 1 sec.V/M SKIPV/M SKIPV/M SKIPV/M SKIPFUNC[EXAMPLE]: Clearing memory channel 3 (memory bank A).