4513OTHER FUNCTIONS Cloning functionThe IC-R3 has receiver-to-receiver data cloning capability.This function is useful when you want to copy all of the pro-grammed contents from one IC-R3 to another. An optionalOPC-474 CLONING CABLE is required.The optional CS-R3 CLONING SOFTWARE and the optionalOPC-478 CLONING CABLE are available to clone and editcontents with a PC (for Microsoft® Windows® 95 and 98).q While pushing [MODE] and ó [UP], push [POWER] for 2sec. to enter cloning mode.• “CLonE” appears.w Connect an optional OPC-474 between both [SP] jacks.e Push [SQL] on the “mas-ter” receiver (receiver-to-receiver cloning only).• “oUt” appears and the signalindicator shows that cloningis taking place.r Push [POWER] for 2 sec.to turn power OFF.Microsoft® and Windows® are regis-tered trademarks of Microsoft Corpo-ration in the U.S.A and othercountries. Partial resetIf you want to initialize the operating conditions (VFO fre-quency, VFO settings, set mode contents) without clearing thememory contents, a partial resetting function is available forthe receiver.➥ While pushing [FUNC] and [V/M], turn power ON to par-tially reset the receiver. Total resetReset the CPU before operating the receiver for the first time,or when the internal CPU malfunctions.➥ While pushing [FUNC], [V/M] and [MODE], turn power ONto reset the CPU.• “CLEAR” appears in the sub LCD when resetting the CPU.CAUTION: Resetting the CPU returns all programmedcontents to their default settings.OPC-474