Panel descriptionq ANTENNA CONNECTOR (p. 1)Connects the supplied antenna.w FUNCTION SWITCH [FUNC]While pushing this switch, other switches and tuning dialperform secondary functions.• “Push [FUNC] + a switch” means “while pushing the [FUNC]switch, push the switch” as indicated by the mark e.g. [↕] etc.e MULTI FUNCTION SWITCH [MULTI]➥ Push [↕] to adjust the audio level. (p. 11)➥ Push [FUNC] + [↕] to toggle between AM TV (frequencyselection), amateur TV (ATV-type) and WFM/FM/AMmodes when the color LCD is OFF. (p. 34)➥ Push [FUNC] + [↕] for 2 sec. to toggle the color LCD ONand OFF (p. 6, 30 MHz and above only).➥ Push [FUNC] + [↕] to select color LCD function when thecolor LCD is ON. (p. 6)➥ Push [↔] to select the operating band (VHF, UHF, etc.)in VFO mode. (p. 7)• Broadcast, HF, 50 MHz, FM broadcast, VHF avionics, 144MHz, 300 MHz, 400 MHz, 800 MHz, 1200 MHz, 2400 MHzand TV bands (channel selection) can be selected.➥ Push [FUNC] + [↔] to select the dial select step. (p. 39)➥ Push [↔] for 2 sec. to start a scan. (pgs. 19, 20)➥ Push [FUNC] + [↔] for 2 sec. to start a tone scan. (p.30)Push [↕] means push ó up or down; and push [↔] meanspush ó left or right.r POWER SWITCH [POWER]Push for 2 sec. to toggle the receiver power ON and OFF.22 PANEL DESCRIPTIONqwertyuioColor LCD(p. 6)Sub LCD(p. 4)SPEAKER!0!1