OPERATING GUIDEiR3 BASIC OPERATIONq Push [POWER] for 2 sec.w Push [↕] to set the desired audiolevel.e Select VFO mode with [V/M].r Select the desired band with [↔].t Rotate [DIAL] to change the fre-quency.• The frequency changes according tothe preset tuning steps.y Set the squelch level.• While pushing [SQL], rotate [DIAL].• The first click of [DIAL] indicates thecurrent squelch level.• “LEVEL1” is loose squelch and“LEVEL9” is tight squelch.• “AUTO” indicates automatic level ad-justment.t When a signal is received:• Squelch opens and audio is emittedfrom the speaker.• The S/RF indicator shows the relativesignal strength.◊ Using the dial select step (p. 39)Rotate [DIAL] while pushing [FUNC]to change the frequency in 100 kHz,1 MHz or 10 MHz steps. DUPLEX OPERATIONq Set the receive station frequency(e.g. repeater output frequency).w Set the shift direction of the trans-mit station frequency in set mode.(–DUP or DUP)e Push and hold [SQL] to monitorthe transmit station’s frequency.◊ Tone scan (p. 30)Push [FUNC] + [↔] for 2 sec. to startthe tone scan. MEMORY CHANNEL SELECTIONq Push [V/M] to select memorymode.• “M:” or “X” appears.w Select a memory channel with[DIAL].e Rotate [DIAL] while pushing[FUNC] to select the memorybank. MEMORY CLEARq Select the desired memory chan-nel.w Select VFO mode with [V/M] andpush [V/M] for 1 sec. to indicatethe channel.e Push [FUNC] + [V/M] for 2 sec.Important operating instructions are summed up in this and the following pagefor your simple reference.By cutting along the line and folding on the dotted line, it will become a cardsized operating guide which can easily be carried in a card case or wallet,etc.q Cut w Fold e Complete5719QUICK REFERENCE