4013 OTHER FUNCTIONS Beep tonesThe volume level for confirmation beep tones, which soundeach time a switch is pushed, can be adjusted, as desired.When “VOLUME” is selected, the beep tone volume level islinked with the receive volume level.q Push [FUNC] + [(MODE) SET] momentarily to enter setmode.• Select a non-band scope screen in advance for color LCD.w Rotate [DIAL] until “Beep Audio” or “bEEP” appears.• “bEEP” disappears after 1 sec. and “bE” appears when color LCDis OFF.e Push [↔] or rotate the tuning dial while pushing [FUNC] toset the volume level.r Push [(MODE) SET] to exit set mode. Auto power-off functionThe receiver can be set to automatically turn OFF after aspecified period with beep in which no switch is pushed.120 min., 90 min., 60 min., 30 min. and OFF can be speci-fied. The specified period is retained even when the receiveris turned OFF by the auto power-off function. To cancel thefunction, select “OFF” in step e below.q Push [FUNC] + [(MODE) SET] momentarily to enter setmode.• Select a non-band scope screen in advance for color LCD.w Rotate [DIAL] until “A.Power OFF” or “AP oFF” appears.• “AP oFF” disappears after 1 sec. and “Ao” appears when colorLCD is OFF.e Push [↔] or rotate the tuning dial while pushing [FUNC] toselect the desired time or to turn the function OFF.r Push [(MODE) SET] to exit set mode.60 min. auto power-offAuto power off setmodeAuto power-off isturned OFF.Beep tone is turnedOFF (minimum).Beep tone is turnedON and linked withthe volume level.Beep tone is fixedto the set level.Pause Scan : 10SECPriority : OFFBeep Audio : VOLUMELight : AUTOA.Power OFF : OFFPause Scan : 10SECPriority : OFFBeep Audio : ______Light : AUTOA.Power OFF : OFFPause Scan : 10SECPriority : OFFBeep Audio : OOO___Light : AUTOA.Power OFF : OFF