4113OTHER FUNCTIONS Power saverThe power saver function reduces the current drain to con-serve battery power.q Push [FUNC] + [(MODE) SET] momentarily to enter setmode.• Select a non-band scope screen in advance for color LCD.w Rotate [DIAL] until “Power Save” or “P SAVE” appears.• “P SAVE” disappears after 1 sec. and “PS” appears when colorLCD is OFF.e Push [↔] or rotate the tuning dial while pushing [FUNC] toturn the power saver ON (AUTO) or OFF.r Push [(MODE) SET] to exit set mode. Monitor switch actionThe monitor switch can be set as a ‘sticky’ switch. When set tothe sticky condition, each push of [SQL] toggles the monitorfunction on and off.q Push [FUNC] + [(MODE) SET] momentarily to enter setmode.• Select a non-band scope screen in advance for color LCD.w Rotate [DIAL] until “Monitor” or “monI” appears.• “monI” disappears after 1 sec. and “mo” appears when color LCDis OFF.e Push [↔] or rotate the tuning dial while pushing [FUNC] toset the monitor switch to sticky (HOLD) or normal (PUSH).r Push [(MODE) SET] to exit set mode.‘Sticky’ actionMonitor switchfunction set mode‘Normal’ actionPower Save : AUTOMonitor : PUSHDial Speedup: ONKey Lock : NORMALDisplay : AUTOPower Save : AUTOMonitor : HOLDDial Speedup: ONKey Lock : NORMALDisplay : AUTOPower Save : AUTOMonitor : PUSHDial Speedup: ONKey Lock : NORMALDisplay : AUTOPower saver ON(AUTO)Power save setmodePower saver OFFPower Save : AUTOMonitor : PUSHDial Speedup: ONKey Lock : NORMALDisplay : AUTODial Speedup: ONKey Lock : NORMALDisplay : AUTODial Speedup: ONKey Lock : NORMALDisplay : AUTOPower Save : AUTOMonitor : PUSHPower Save : OFFMonitor : PUSH