Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual

Also see for COMMUNICATIONS RECEIVER IC-R3: Service manual Brochure & specs Service manual

Contents

175MEMORY CHANNELS Memory namesEach memory channel and scan edge channels can be pro-grammed with an alphanumeric name such as a repeatername, club name, etc., for easy recognition. Names can be amaximum of 6 characters—see the table at right for availablecharacters.The color LCD and memory names can be used when theoperating frequency is 30 MHz and above.q Push [FUNC] + [↕] for 2 sec. to turn the color LCD ON.w Push [FUNC] + [↕] one or more times to select the simpleor multi-function screen.• The memory names are available for the simple and multi-func-tion screens only.e Select the desired memory channel.r Push [FUNC] + [(V/M) SKIP] for 2 sec. to program thememory name.• The first character of the name flashes.t Rotate the tuning dial to select the desired character.• See the following table for a list of available characters.y Push [↔] (right) to advance to the next character.• Push [↔] (left) to select the previous character.u Repeat t and y until the desired name is input.i Push [V/M] to program the name and exit programmingmode.o If you want to set other channels, rotate the tuning dial. Re-peat r through i to set the desired name.The memory names are automatically programmed intothe memory channels.S1 3 5 7 9VOLFM FMM:A00146.100.00015.0JA3TS146.100.000M:A00TS 15.0JA3A B C D E F G H I JK L M N O P Q R S TU V W X Y Z a b c de f g h i j k l m no p q r s t u v w xy z 0 1 2 3 4 5 6 78 9 ? ! $ % # + – M/ = ( ) : ; . , _ ’~ space