Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual
Also see for COMMUNICATIONS RECEIVER IC-R3: Service manualBrochure & specsService manual
                                                                | |
Contents
|
5819 QUICK REFERENCE SCAN◊ Full/band/programmed scanq Select VFO mode with [V/M].w Make sure the squelch is set tothe threshold point.e Push [↔] for 2 sec. to start thescan.• Rotate [DIAL] while pushing [↔] toselect scan edge, if desired.• To change the scanning direction, ro-tate [DIAL].r Push [↔] again to stop the scan.◊ Memory (bank) scanq Select memory mode with [V/M].w Make sure the squelch is set tothe threshold point.e Push [↔] for 2 sec. to start thescan.• Rotate [DIAL] while pushing [↔] toturn memory bank scan ON or OFF,if desired.r Push [↔] again to stop the scan. SET MODEq Push [FUNC] + [(MODE) SET]momentarily to enter set mode.• Select non-band scope screen in ad-vance for color LCD.w Rotate [DIAL] to select a display.e Push [↔] or rotate [DIAL] whilepushing [FUNC] to set the condi-tion.r Push [ (MODE) SET] to exit setmode. LOCK FUNCTIONPush [FUNC] + [(MODE) SET] for 2sec. to toggle the lock function ON orOFF. (p. 9) CPU RESETTING◊ Partial resetting (p. 45)While pushing [FUNC] and [V/M],turn power on to partially reset thereceiver.• Partial resetting does not clear the mem-ory channel contents.◊ Total resetting (p. 45)While pushing [FUNC], [V/M] and[MODE], turn power on to reset thereceiver.Caution: Resetting the receiverinitializes all memory contents. |
Related manuals for Icom COMMUNICATIONS RECEIVER IC-R3
Icom COMMUNICATION RECEIVER IC PCR100 Instruction Manual
Icom IC-R1 Instruction Manual
Icom IC-R2 Instruction Manual
Icom IC-R5 Instruction Manual
Icom IC-R6 Instruction Manual
Icom IC-R2 Instruction Manual
Icom IC-R5 Instruction Manual
Icom IC-R6 Instruction Manual
Icom IC-R10 Instruction Manual
Icom IC-R75 Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine