1 PANEL DESCRIPTION5 KeypadKEY PRIMARY FUNCTION SECONDARY FUNCTION (while pushing [FUNC])Push for 1 sec. to toggle power ON and OFF. Opening mes-sage appears for 1 sec. after power ON (p. 10). Not availablePush and hold this switch to force the squelch open (p. 64). Not availableSelects a receive mode: FM, AM, USB, LSB, CW or WFM(p. 12). Selects tuning step set mode (p. 13).Clears numeric key input (p. 14).Stops scanning (p. 39). Selects SET mode (p. 59).Toggles VFO or MEMORY mode (pgs. 11, 23).In VFO mode: writes to a memory channel (p. 29). In MEM-ORY mode: transfers memory contents to VFO mode (p. 33)or copies to another channel (p. 33).Starts/stops scanning (p. 39). In VFO mode: selects a dial select step (p. 16).Selects EASY mode (p. 50). Selects memory channel name search mode (p. 67).Selects memory edit mode. (except when in VFO mode; p.51).Locks all switches and controls electronically except [VOL],[SQL], [FUNC], [POWER] and [MONI] (p. 64).In VFO mode: enters the selected receive frequency (p. 14).In MEMORY mode: enters the selected memory channel bythe memory search function (p. 68).Activates the noise blanker while in SSB and CW mode, orthe ANL function while in AM mode (p. 65).POWERMONIMODETSCLRSETV/MMWSCANDIAL SELEASYSEARCHEDITLOCKENTNB/ANL

I Front and side panels

top panel

I Function display

I Keypad

PANEL DESCRIPTION ......................................................... 1

I Charging Ni-Cd batteries

I Battery installation

Ni-Cd BATTERIES AND ACCESSORIES ............................ 7

I General

I Selecting a receive mode

I Selecting a tuning step

I Tuning a frequency (via the keypad)

I Tuning a frequency (via the [DIAL])

I Dial select steps

I Band scope function

I Listening example 1

I Listening example 2

I Selecting memory mode

I Programming a memory channel—1

I Programming a memory channel—2

I Programming a memory channel—3

I Programming example 1

I Programming example 2

I Programming example 3

I Memory copy

I Copying example 1

I Before scanning

I Memory scan

I Program scan

I Auto memory write scan

I Mode select scan

I Skip function

I SIGNAVI function

priority watch

EASY mode

I Memory channel edit

set frequency

set attenuator

I Program scan channel edit

I Program scan or EASY mode channel edit

I Low battery indicator

I Monitor function

I ATT function

I Sleep timer

I Memory search function

selecting a memory channel

I Auto mode and TS function

I Resetting the CPU

I Data cloning

ALPHANUMERIC KEY ASSIGNMENT

I Data format

troubleshooting

SPECIFICATIONS

OPTIONS

Icom IC-R10 Instruction Manual

IC-R10