5 SCANNING OPERATION39 Full scanThis is the simplest scanning operation, searching the full fre-quency range (0.5–1300 MHz) in the selected receive modeand tuning step.Start and stop the scan1Push [V/M] to select VFO mode. (p. 11)2Push [SCAN] to startscanning.To change the direction of the scanning, rotate [DIAL]during scanning.When the program skipfunction is ON (p. 61), fre-quencies stored in BANKR memories are skipped.Also, “SKIP” is displayed.3Push [SCAN] or [CLR] to stop scanning.SCAN VFOFM144.0000Flashes while scanningVFOFM144.0000SKIPSkip indicator Memory scanThis is the simplest way to search for all stored frequencies inmemory channels.Start and stop the scan1Push [V/M] to select MEMORY mode.2Push [SCAN] to startscanning.To change the direction of the scan, rotate [DIAL] duringscanning.When the memory skipfunction is ON (p. 61),specified memory chan-nels (p. 56) are skipped.Also, “SKIP” is displayed.3Push [SCAN] or [CLR] to stop scanning.SCAN MEMOFMA00 144.0000Flashes while scanningMEMOFMA00 144.0000SKIPSkip indicator

I Front and side panels

top panel

I Function display

I Keypad

PANEL DESCRIPTION ......................................................... 1

I Charging Ni-Cd batteries

I Battery installation

Ni-Cd BATTERIES AND ACCESSORIES ............................ 7

I General

I Selecting a receive mode

I Selecting a tuning step

I Tuning a frequency (via the keypad)

I Tuning a frequency (via the [DIAL])

I Dial select steps

I Band scope function

I Listening example 1

I Listening example 2

I Selecting memory mode

I Programming a memory channel—1

I Programming a memory channel—2

I Programming a memory channel—3

I Programming example 1

I Programming example 2

I Programming example 3

I Memory copy

I Copying example 1

I Before scanning

I Memory scan

I Program scan

I Auto memory write scan

I Mode select scan

I Skip function

I SIGNAVI function

priority watch

EASY mode

I Memory channel edit

set frequency

set attenuator

I Program scan channel edit

I Program scan or EASY mode channel edit

I Low battery indicator

I Monitor function

I ATT function

I Sleep timer

I Memory search function

selecting a memory channel

I Auto mode and TS function

I Resetting the CPU

I Data cloning

ALPHANUMERIC KEY ASSIGNMENT

I Data format

troubleshooting

SPECIFICATIONS

OPTIONS

Icom IC-R10 Instruction Manual

IC-R10