1. Set upq Set the frequency you want to program in VFO mode.w While pushing [FUNC], push [ (V/M) MW] to enter mem-ory write mode.2. BANK and memory channel settingq While pushing [FUNC], rotate [DIAL] to select the BANKyou want to program (p. 24).w Rotate [DIAL] or push 2 digit keys to select the memorychannel you want to program (p. 24).4 MEMORY MODE27 Programming a memory channel — 3This is the easiest way to memorize the received frequency,mode and other information along with memory, BANKnames, scanning condition, etc. in one operation.3. Programming detailsq Push [EDIT] to enter memory programming mode.w Rotate [DIAL] or enter the alphanumeric characters viathe keypad to program a memory name.• When you enter channel names with [DIAL] or a character as-signed to the same key, push [ENT] before you enter the nextcharacter to change the digit (see page 72 for alphanumerickey assignments).122
