5 SCANNING OPERATION432. Start and stop scanningPush [SCAN] to startscanning.To change the scan direction, rotate [DIAL] during scan-ning.When the memory skipfunction is ON (p. 61),specified memory chan-nels (p. 56) are skipped.Also, “SKIP” is dis-played.Push [CLR] or [SCAN] to stop scanning.The specified BANK must have 2 or more stored channels,otherwise, the scan will not proceed.MEMOAMF01 121.5000SCANFlashes while scanning BANK scanScans all stored frequencies into a specified BANK, exceptfor SKIP channels.1. Select BANK scan and BANK numberq Push [V/M] to select MEMORY mode (p. 23).w While pushing[FUNC], push[(8)BANK-S].Rotate [DIAL] to se-lect the BANK num-ber.Displays “BANK SCAN” with BANK number and thenames.8BANK-SFUNC MEMOFMBANK SCANA:+[DIAL]MEMOFMBANK SCANF:AviationMEMOAMF01 121.5000SKIPSkip indicator
