Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

165MEMORY OPERATION45■ General descriptionThe receiver has 1100 memory channels including 100 scanedge memory channels (50 pairs) for storage of often-usedfrequencies. And a total of 21 memory banks, A to H, J to R,T, U, W and Y are available for storing groups of frequencies,etc. Up to 100 channels can be assigned into a bank.DD Memory channel contentsThe following information can be programmed into memorychannels:• Operating frequency ((p. 9))• Receive mode ((p. 10))• Duplex direction (DUP+ or DUP–) with an offset fre-quency ((p. 15))• Tone squelch or DTCS squelch ON/OFF ((p. 33))• Tone squelch frequency or DTCS code with polarity((p. 38))• Scan skip information ((p. 28))■ Memory channel selectionq Push [MR•SKIP] to select memory mode.• “!” indicator appears.w Rotate [DIAL] to select the desired memory channel.• Programmed memory channels can only be selected.[MR•SKIP] “!” appearsIf memory banks or weather channels* mode appears whenpushed [MR•SKIP] at step q, push [MR•SKIP] and rotate[DIAL] to select “bAnk --,” then push [MR• SKIP] again.*Available for USA/CANADA versions only.