Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

25SCAN OPERATION6■ Scan typesScanning searches for signals automatically and makes iteasier to locate new stations for contact or listening purposes.There are 5 scan types and 4 resume conditions to suit youroperating needs.FULL SCAN ((p. 26)) Repeatedly scans all frequen-cies over the entire band.Some frequency ranges arenot scanned according to thefrequency coverage of the re-ceiver’s version.10kHz3299.9999MHzScanJumpALL/SELECTED BANKSCAN ((p. 26))Repeatedly scans all bankchannels or selected bankchannels. The skip scan isalso available.SKIPSKIPA99 A03A00 A01 A02A04A98 A05PROGRAMMED SCAN((p. 26))Repeatedly scans betweentwo user-programmed fre-quencies. Used for checkingfor frequencies within a speci-fied range such as repeateroutput frequencies, etc.Bandedge xxA xxBBandedgeScan edgesScanJumpMEMORY (SKIP) SCAN((p. 26))Repeatedly scans memorychannels except those set asskip channel. Skip channelscan be turned ON and OFFby pushing and holding[MR•SKIP] in memory mode.SKIPSKIPM 0 M 4M 1 M 2 M 3M 5M 199 M 6FREQUENCY/MEMORYSKIP FUNCTION ((p. 28))Skips unwanted frequenciesor channels that inconve-niently stop scanning. Thisfunction can be turned ONand OFF by pushing andholding [MR•SKIP] in memorymode.BandedgeBandedgeScanSKIP SKIPJump