Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

328POCKET BEEP AND TONE SQUELCH8i Push any switch to exit tone squelch selection mode.o When a signal with the matched tone is received, the re-ceiver emits beep tones and blinks “S.”• Beep tones sound for 30 sec. and “S” blinks. To stop thebeeps and blinking manually, push any switch.!0 Push and hold [MONI•T/T-SCAN] for 1 sec. to enter tonesquelch selection mode, then rotate [DIAL] to cancel thetone squelch or DTCS squelch function.• “oFF” is selected for turning the function OFF.D Available tone frequency listNOTE: The receiver has 51 tone frequencies and conse-quently their spacing is narrow compared to units having38 tones. Therefore, some tone frequencies may receiveinterference from adjacent tone frequencies.D Available DTCS code listD Calling a waiting station using pocket beepA subaudible tone matched with the station’s CTCSS tone fre-quency or 3-digit DTCS code with polarity is necessary. Usethe tone squelch on the next page ((p. 33)).023025026031032036043047051053125131132134143145152155156162245246251252255261263265266271356364365371411412413423431432506516523526532546565606612624054065071072073074114115116122165172174205212223225226243244274306311315325331332343346351445446452454455462464465466503627631632654662664703712723731732734743754Appears when the pocket beepwith tone squelch is activated.Appears when the pocket beepwith DTCS squelch is activated.67.069.371.071.974.477.079.782.585.488.591.594.8097.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1