Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

35SET MODE9■ GeneralDD Set mode operationq Push [SET•LOCK] to enter set mode.w Push [SET•LOCK] or [S.MW•MW] to select the desireditem.e Rotate [DIAL] to select the desired condition of the item.r Push [TS•MODE] or any switch below the display to exitset mode.† Appears when accessing set mode from VFO mode only.‡ Appears when accessing set mode from memory mode only.: Push: Push• Weather alert* 1When the UT-106 is installed• Display dimmer• Auto power OFF• Key-touch beep • Beep output level • Display color• TSQL frequency• DTCS code• DTCS polarity• Offset frequency• Duplex direction• Display contrast• Scan resume timer • VSC function• Bank link function‡• AFC function* 2• NR function* 4 • ANF function* 4• Squelch delay• IF filter• IF shift*3• Program skip†• Scan skip area†• Memory name‡Memory modeonlyFM mode only VFO mode onlySSB/CWmode onlyUSA/CANADAversions only* 1 Available for USA/CANADA versions only.* 2 Appears while in FM mode only.* 3 Appears while in SSB/CW mode only.* 4 Appears when the UT-106 is selected.■ Set mode items