Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

175 MEMORY OPERATIONVFO settings, including the set mode contents such as sub-audible tone frequency or scan skip information, can be pro-grammed into a memory channel.q Push [V/MHz•SCAN] to select VFO mode.wSet the desired frequency using [DIAL].➥ Set other data (e.g. subaudible tone frequency, scanskip information, etc.) if required.ePush [S.MW•MW] to enter select memory write mode.• “!” indicator and the memory channel number blink.rRotate [DIAL] to select the desired memory channel to beprogrammed.• Memory channels not yet programmed are blank.t Push and hold [S.MW•MW] for 1 sec. to program.• 3 beeps sound• Memory channel number automatically increases when contin-uing to push [S.MW•MW] after programming.✔CONVENIENTMemory programming can be performed in versatile wayse.g. memory channel to the same (or different) memory chan-nel, etc.■ Programming a memory channel[EXAMPLE]: Programming 145.800 MHz into memory channel 20 (blank channel).Beep“Rotate Push for 1 sec. and continue to push ➠Beep“BeepBeepBeep“““““Push Rotate for setting frequency, etc. Push .