409SET MODE9DD Memory bank link functionSets the memory bank link function ON and OFF (default).The link function provides continuous banks scan, that scansall contents in the selected banks during bank scan.This item appears when set mode is accessed from memorymode only.ā¢ Bank link settingq Rotate [DIAL] to select the memory bank link function ON.w Push and hold [SETā¢LOCK] or [S.MWā¢MW] for 1 sec. toenter bank link setting mode.e Push [SETā¢LOCK] or [S.MWā¢MW] to select the desiredbank to be linked.ā¢ A : Bank A ā¢ b : Bank B ā¢ C : Bank C ā¢ d : Bank Dā¢ E : Bank E ā¢ F : Bank F ā¢ G : Bank G ā¢ H : Bank Hā¢ J : Bank J ā¢ k : Bank K ā¢ L : Bank L ā¢ m : Bank Mā¢ n : Bank N ā¢ o : Bank O ā¢ P : Bank P ā¢ q : Bank Qā¢ r : Bank R ā¢ t : Bank T ā¢ U : Bank U ā¢ W: Bank Wā¢ y : Bank Yr Rotate [DIAL] to select āOnā to linking the bank.t Repeat steps e and r to set the link condition.y Push [TSā¢MODE] or any switch below the display to returnto set mode.DD AFC settingTurns AFC (Automatic Frequency Control) function ON andOFF. (default: OFF)DD Filter settingSelect the IF filter passband width from 3, 6, 15, 50 and 230(depending on the selected mode.)DD Weather alert functionTurns weather alert function ON and OFF.U.S.A./CANADA versions onlyBank A ON Bank A OFF