Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

399 SET MODEDD VSC settingTurns VSC (Voice Squelch Control) function ON and OFF.(default: OFF)DD Scan resume timerSelects scan resume timer from SCT-15 (default), SCT-10,SCT-5 and SCP-2. Scan resumes after the specified periodwhen the received signal disappears.• SCT-15/10/5 : Scan pauses for 15/10/5 sec. when thereceived signal disappears.• SCP-2 : Scan pauses on a signal until signal dis-appears, then resumes 2 sec. after thesignal disappears.DD Program scan skip settingSets the program scan skip setting ON and OFF for VFOscan operation, such as programmed scan.(default: ON)This item appears when set mode is accessed from VFOmode only.DD Scan skip area settingSets the pre-programmed scan skip area setting ON and OFFfor VFO scan operation, such as programmed scan.This item appears only when the scan skip area setting is pro-grammed by the clone ((p. 44)) and set mode is accessedfrom VFO mode.DD Memory name settingSets memory name setting from ON (appear) and OFF (notappear; default) for memory name appearance.This item appears when set mode is accessed from memorymode only.