Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

31POCKET BEEP AND TONE SQUELCH8■ Pocket beep operationThis function uses subaudible tones for calling and can beused as a “common pager” to inform you that someone hascalled while you were away from the receiver.D Waiting for a call from a specific stationq Set the operating frequency in FM mode.w Push [SET•LOCK] to enter set mode.e Push [SET•LOCK] or [S.MW•MW] several times until “Ct”(when selecting the tone squelch frequency) or “Dt” (whenselecting the DTCS code squelch) appears.r Rotate [DIAL] to select the desired tone frequency orDTCS code.t When operating the pocket beep function with DTCS codesquelch, push [SET•LOCK] once then rotate [DIAL] to se-lect the DTCS polarity.y Push [TS•MODE] or any switch below the display to exitset mode.u Push and hold [MONI•T/T-SCAN] for 1 sec to enter tonesquelch selection mode, then rotate [DIAL] until “S ”or “ S” appears to turn the pocket beep function ONwith tone squelch or DTCS squelch, respectively.[MONI•T/T-SCAN][DIAL]Appears when the pocket beepwith tone squelch is turend ON.Appears when the pocket beepwith DTCS squelch is turned ON.DTCS polarity setting[DIAL]Tone squelch frequency setting DTCS code setting[SET•LOCK]