Jenn-Air JES9750BAB Use & Care Manual

Also see for JES9750BAB: Use & care guide

9Oven WindowLeveling LegsANTI-TIP BRACKETLEVELING LEGBe sure the anti-tip bracket secures one of the rearleveling legs to the floor. This bracket prevents the rangefrom accidentally tipping.Be sure the range is leveled when installed. Ifthe range is not level, turn the leveling legs,located at each corner of the range, until rangeis level.ANTI-TIP BRACKETLEVELING LEGCAUTIONTo assure the proper replacement bulb is used, order bulbfrom Jenn-Air. Call 1-800-JENNAIR (1-800-536-6247), ask forpart number 74004458 - halogen bulb.To Replace Oven Light Bulb:1. Disconnect power to the appliance.2. When oven is cool, use fingertips to grasp edge of bulbcover. Pull out and remove.3. Carefully remove old bulb by pulling straight out ofceramic base.4. To avoid damaging or decreasing the life of the new bulb,do not touch the bulb with bare hands or fingers. Holdwith a dry cloth or paper towel. Push new bulb prongsstraight into small holes of ceramic base.5. Replace bulb cover by snapping into place.6. Reconnect power to the oven. Reset clock.Oven LightCAUTION• Disconnect power to oven before replacing light bulb.• Allow oven to cool before replacing light bulb.• Make sure bulb cover and bulb are cool before touching.To protect the oven door window:1. Do not use abrasive cleaning agents such as steel woolscouring pads or powdered cleansers as they may scratchthe glass.2. Do not hit the glass with pots, pans, furniture, toys, orother objects.3. Do not close the oven door until the oven racks are inplace.Scratching, hitting, jarring or stressing the glass may weakenits structure causing an increased risk of breakage at a laterdate.