Jenn-Air JES9750BAB Use & Care Manual

Also see for JES9750BAB: Use & care guide

17O VEN C OOKINGA Rapid Preheat Use to decrease preheating time.B Convect Use for convection baking and roasting.C Bake Use for baking and roasting.D Broil Use for broiling and top browning.E TIMER 1 Sets timer.F Display Displays oven functions, options andwindow time of day.G TIMER 2 Sets timer.H Number Pads Use to enter time and temperature,or to enter Favorites names.I Favorites Use to access, program or savebaking cycles.J More Options Use to access additional features.K Clean Use to set self-clean cycle.L Setup Use to view or change factorydefault settings.M Vent Fan Activates the ventilation fan onthe cooktop.N Oven Light Use to turn the oven light on or off.O CANCEL Cancels all operations except Timer,Clock, Favorites, Setup and Vent Fan.P Quickset pads Use to select options in displaywindow (next to display windowon both sides).The control panel is designed for ease in programming. The display window shows options for each function and moves from stepto step through the programming process. Control panel features vary by model. Oven display above is programmed for a bakeoperation.A B C D E F G HControl PanelQuickset PadsQuickset pads are located on each side of the display windowand are used to select the desired function or option in thedisplay window. To select the option or function, press theQuickset pad next to the word.Important: Four seconds after entering the function,option, number or letter, the function will automatically beentered. If more than 30 seconds elapse between steps inprogramming, the function will be canceled and thedisplay will return to the previous display.ClockSetting the Clock:1. Press the Setup pad.2. Select CLOCK using the Quickset pads.3. Select TIME.4. Enter the time using the number pads.5. Press Enter pad.6. Select AM or PM in 12 hour mode. (For 24 hour clock, seepage 18.)7. To exit the Setup mode, press Setup pad.If you need to back out of a function or option in the display,press the Back pad. When your programming is complete,press the Enter pad or wait four seconds and the function willstart automatically.Up arrows indicate additional screens with additional options.Press the Quickset pads next to the arrows to scroll throughthe display.I J K L M N O P