98ru.29Analog pre-torque rawru.30Analog pre-torqueprocessedThis parameter displays the value of the actual pre-torque signal applied betweenterminal X2A.3 and X2A.4. The value is in percent +/- 100.0% = +/- 10.00V. Thisvalue is unfiltered and unprocessed.Units: %This parameter displays the processed analog pre-torque value. Filters, offsets andgains are applied to this value. Again 100.0% = 10.00V on the input.Units: %This parameter displays the value of the analog signal applied to an option interfaceboard. The value is in percent +/- 100.0% = +/- 10.00V. This value is unfiltered andunprocessed.Units: %This parameter displays the processed analog option value. Filters, offsets andgains are applied to this value. Again 100.0% = 10.00V on the input.Units: %Analog output 1 preamp display. The value is in percent +/- 100.0% = +/- 10.00V.Units:%Analog output 1 post amp display. The value is in percent +/- 100.0% = +/- 10.00V.Units:%Analog output 2 preamp display. The value is in percent +/- 100.0% = +/- 10.00V.Units:%Analog output 2 post amp display. The value is in percent +/- 100.0% = +/- 10.00V.Units:%ru.31Analog optionrawru.32Analog optionprocessedru.33Analog Out 1preampru.34Analog Out 1post-ampru.35Analog Out 2preampru.36Analog Out 2post-ampDiagnostic parameters
