Kemppi AX MIG Welder Operating Manual

AX MIG WelderOperating manual - ENEtherCATThis table lists the EtherCAT fieldbus settings.Parameter Value DescriptionIdentification informationETG Vendor ID 0x00FE0001 Vendor identifier assigned to Kemppi by ETG (EtherCAT Tech-nology Group).Device type 0x00000000 Identifier of the type of the welding system.Product code 3 Code from which the robot identifies the welding system.Serial number Example: 750012345 Serial number of the welding power source.Device name AX MIG Welder Name of the welding system.Hardware version Example: 1 Hardware version of the welding system.Module version Example: 1.23.4 Software version of the fieldbus module.Configuration parametersDevice ID 1...65535 Node address of the fieldbus module.ProfinetThis table lists the Profinet fieldbus settings.Parameter Value DescriptionIdentification informationDevice ID 0x0003 Code from which the robot identifies the welding system.PNO Vendor ID 0x0368 Vendor identifier assigned for Kemppi.Station type AX MIG Welder Name of the welding system.Order ID Fieldbus module ordering code.Serial number Example: PSNK0012345 Serial number of the welding power source.Hardware version Example: 1 Hardware version of the welding system.Module version Example: 1.23.4 Software version of the fieldbus module.Port 1 / Port 2 MAC address Example:AA:BB:CC:DD:EE:FFThe unique address identifier of the fieldbus module's Ethernetports 1 and 2.3.2.14 LogbookLogbook collects information about system operation and welding into one view for monitoring and troubleshooting.You can use filters to show/hide content. Selecting a row opens the Weld data view.© Kemppi 131 1921900 / 2318