Kemppi AX MIG Welder Operating Manual

AX MIG WelderOperating manual - ENCONTENTS1. General 51.1 Equipment description 71.2 X5 Power Source 400 and 500 91.3 R500 wire feeders 111.3.1 Wire feed mechanism 131.3.2 Wire feeder peripheral connector 141.3.3 Wire feeder control cable connector 141.4 AX MIG Welder interconnection cable 161.5 RCM (Robot Connectivity Module) 181.6 Cooling unit (optional) 202. Installation 212.1 Installing power source mains plug 222.2 Connecting to AX Manager user interface 232.3 Installing equipment on stand (optional) 242.4 Installing cooling unit (optional) 252.5 Installing RCM on power source (optional) 282.6 Mounting wire feeder on robot arm 302.7 Removing and attaching RCM top cover 312.8 Routing cables into RCM 332.9 Connecting PE (protective earth) wire (optional) 352.10 Installing fieldbus module (optional) 362.11 Removing fieldbus module 382.12 Installing add-on cards (optional) 402.12.1 Add-on card combinations for external device control 402.12.2 Add-on card combinations for digital robot control 442.13 Connecting touch sensor fast output (optional) 452.14 Connecting backup power supply (optional) 462.15 Connecting door switch (optional) 472.16 Connecting stop switch (optional) 482.17 Connecting cables to wire feeder 492.18 Connecting cables to power source and RCM 512.19 Installing wire guide tubes 522.20 Removing wire guide tubes 552.21 Installing feed rolls 572.22 Removing feed rolls 592.23 Mounting welding gun 612.24 Installing wire 62© Kemppi 2 1921900 / 2318