Kemppi AX MIG Welder Operating Manual
                                                                                                                                                                                |
AX MIG WelderOperating manual - EN5.9 Appendix: System integration checklistThis section lists the tasks necessary to complete the system integration. Each task is a link to the corresponding instruc-tions.Installation:1. Install the power source mains plug2. Install the equipment on the stand (optional)3. Install the cooling unit (optional)4. Install RCM on the power source (optional)5. Mount the wire feeder on the robot arm6. Connect the protective earth cable (optional)7. Install the fieldbus module (optional)8. Install the add-on cards (optional)9. Connect the cables to the wire feeder10. Connect the cables to the power source and RCM11. Turn on the welding system12. Install the wire guide tubes13. Install the feed rolls14. Install the gas supplyConfiguration:1. Connect to the AX Manager user interface2. Configure network settings3. Configure device settings4. Configure robot settings5. Configure fieldbus settings (optional)6. Apply welding programs (configure memory channels)7. Make a system backup file (optional).© Kemppi 176 1921900 / 2318 |
Related manuals for Kemppi AX MIG Welder
Kemppi X8 MIG Welder Operating Manual
Kemppi A7 MIG Welder 350 Operating Manual
Kemppi A3 MIG Operating Manual
Kemppi X8 MIG Operating Manual
Kemppi A7 Operating Manual
Kemppi A5 MIG 1500 Operating Manual
Kemppi X8 Operating Manual
Kemppi X3 Operating Manual
Kemppi 25 Operating Manual
Kemppi Kempact MIG 2530 Operating Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine