Kemppi AX MIG Welder Operating Manual

AX MIG WelderOperating manual - ENIf there aren't any Pulse memory channels available, create a new one for Pulse process by selecting an available Pulsewelding program for the channel.>> Once selected, the corresponding Pulse welding process parameters become available for adjustment in theWelding parameters view. For more information, refer to the pulse welding parameters in "Welding para-meters" on page 106.DPulseDPulse is a double-pulse MIG/MAG welding process with two separate power levels. The welding power varies betweenthese two levels. The parameters of each level are controlled independently.>> To take DPulse welding process into use, go to the Memory channels view and select an available DPulsechannel.If there aren't any DPulse memory channels available, create a new one for DPulse process by selecting an availableDPulse welding program for the channel.>> Once selected, the corresponding DPulse welding process parameters become available for adjustment in theWelding parameters view. For more information, refer to the pulse welding parameters in "Welding para-meters" on page 106.3.3.6 WiseRoot+ processX5 Power Source Pulse+, R500 Wire Feeder EUR+Requires the use of the voltage sensing cable (refer to "AX MIG Welder interconnection cable" on page 16).The WiseRoot+ welding process improves the quality of root pass welds. WiseRoot+ is based on accurate measurementof arc voltage.Before welding, attach the voltage sensing cable to the workpiece. For optimal voltage measurement, connect the earthreturn cable and the voltage sensing cable close to each other and away from the other welding units' cables.WiseRoot+ is a synergic MIG/MAG process optimized for open-gap root pass welding. The process is based on precisemeasurement of voltage between the welding gun nozzle and the workpiece. The measurement data serves as input forthe current control. The process is suitable for root pass welding in all positions, and provides a smooth and spatter-freearc.>> To take WiseRoot+ into use, go to AX Manager's Welding parameters view and apply WiseRoot+. Optionally,go to the Memory channels view and create a new memory channel with WiseRoot+ process.>> Adjust the wire feed speed in the Home view.>> Fine-tune the heat output while welding in the Home view.3.3.7 WiseThin+ processX5 Power Source Pulse+, R500 Wire Feeder EUR+Requires the use of the voltage sensing cable (refer to "AX MIG Welder interconnection cable" on page 16).WiseThin+ is a synergic MIG/MAG process whose short-arc features are optimal for welding sheet metals (plate thickness0.8 - 3.0 mm). It is based on precise measurement of voltage between the welding gun nozzle and the workpiece.Before welding, attach the voltage sensing cable to the workpiece. For optimal voltage measurement, connect the earthreturn cable and the voltage sensing cable close to each other and away from the other welding units' cables.© Kemppi 139 1921900 / 2318