Kenwood CS-8010 Instruction Manual

a) When storing a waveform with the SWEEP TIME set tobetween 20 /xs/div and 0.5 /ts/divb) When storing a waveform with the SWEEP TIME set tobetween 1 s/div and 50 /ts/divFig. 261) Example:When storing a waveform with 20 jtis/div, bypre-triggering.DISPLAY MODE : STORETRIGGERING MODE : SINGLE-RESETPRE TRIG : 5 DIVFig. 281) Example:When storing a waveform with 1 s/div, bypre-triggering.DISPLAY MODE : STORETRIGGERING MODE : SINGLE-RESETPRE TRIG : 5 DIV2) Example:When the waveform in the upper figure is ex-panded, by magnifying the Sweep Time by20.(Horizontal resolution: 10 dot/div.)The horizontal resolution is derived from the followingequation:Resolution_ Resolution in normal sweep mode (200 dot/div)Reference sweep range in expansion mode (20 ^s/div)Sweep range in expansion mode21Fig. 27 Fig. 292) Example:When the waveform in the upper figure isdisplayed using the expansion range(Horizontal resolution: 20 dots/div.)In this, the Sweep Time indicator, 2 /is/div.,in expansion mode cannot be used as it is. thesweep range can be obtained by the followingequation:Real sweep range_ / Sweep range in storage mode _\\Reference sweep range in expansion mode (20 /is/div)Jx Displayed sweep rangeTherefore, the sweep range in this expansion mode can bederives by the following equation:1 ms „Sweep range = ———x 2 /is20 /is= 100/ts/div.