Kenwood CS-8010 Instruction Manual

Cursor mode 4 V 1 : Voltage difference between ^ R E F and A cursors on a CH1 scale factor basisCursor modeAV2: Voltage difference between AREF and A cursors on a CH2 scale factor basisCursor modeAT: Time difference between AREF and A cursors on the basis of sweep scale factorCursor modeMAT: Frequency between AREF and A cursors on the basis of sweep scale factorRatio: Voltage ratio and time ratio between A REF and A cursors, supposing 5 div. onthe CRT as 100%Phase: Phase difference between AREF and A cursors, supposing 5 div. on the CRTas 360°NOTE: The X-Y mode allows AVI measurement only.CursormeasurementResolution 10 bitsCursormeasurement Measurementaccuracy ± 4 %CursormeasurementMeasurable range AV, Ratio: ± 3 . 6 div or more from the CRT centerAT, MAT, Ratio, Phase: ± 4 . 6 div or more from the CRT centerT R A C E ROTATION (Electrical, adjustable from front panel)POWER REQUIREMENTLine Voltage AC 100 V/120 V/220 V ± 10% 216 V - 250 VLine Frequency 50/60 HzPower Consumption Approx. 58 WDIMENSIONS ( W x H x D ) 319 (359) x 132 (145) x 380 (442) mm( ) dimensions include protrusion from basic outline dimensionsWEIGHT Approx. 9.6 kgENVIRONMENTALWithin Specifications 10°C to 35°C, 8 5 % max. relative humidityFull Operation 0°C to 40°C, 8 5 % max. relative humidityA C C E S S O R I E S SUPPLIEDProbe PC-33 (READOUT compatible probe) x 2Attenuation 1/10Input impedance ..10 MO, 22 pF+ 10%Power supply cable 1Replacement Fuse 1.2A x 2, 0.8A x 2Instruction Manual 1* Circuit and rating are subject to change without notice due to developments in technology.6