Kenwood KDC-W7031 Instruction Manual

Contents

English | 11Faceplate Angle AdjustmentPress the [ANG] button for at least 1 second.• Do not apply excessive force to the faceplate. It cancause damage.Theft Deterrent FaceplateThe faceplate of the unit can be detached andtaken with you, helping to deter theft.Removing the FaceplatePress the Release button.The faceplate is unlocked, allowing you to detachit.• The faceplate is a precision piece of equipment andcan be damaged by shocks or jolts. For that reason,keep the faceplate in its special storage case whiledetached.• Do not expose the faceplate or its storage case todirect sunlight or excessive heat or humidity. Alsoavoid places with too much dust or the possibility ofwater splashing.Reattaching the Faceplate1 Align the shaft on the unit with thedepression on the faceplate.2 Push the faceplate in until it clicks.The faceplate is locked in place, allowing you touse the unit.Speaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Speaker Setting modePress the [VOL] knob."SP SEL" is displayed.3 Select the Speaker typeTurn the [VOL] knob.Each time the knob is turned, the settingswitches as shown below.Speaker type DisplayOFF "OFF"For 5 & 4 in. speaker "5/4 inch"For 6 & 6x9 in. speaker "6x9/6 inch"For the OEM speaker "O.E.M."4 Exit Speaker Setting modePress the [VOL] knob.