English | 21• G-Graphic displayDisplays the condition of G on horizontal direction(e.g; when turning the curve) by the graphic.• G-Meter display (Graphic)Displays the maximum value of acceleration G, rightdirection G, and left direction G by the numericalvalue.• G-Meter display (Text)The maximum value of acceleration G, right directionG, and left direction G is displayed by the numericalvalue. The value of G is only the reference so it isdiffered from the actual value.• G-Counter displayAdds the point of the acceleration level. The pointis determined after a lapse of 1 hr drive or at poweroff (ex; ACC Off ), and then it will be displayed by thegraph. Furthermore, it displays the average of the pastdata by the line. (The scale of graph is determinedalong with the largest point among the past 10 data.)• The value of G-Meter display and G-Counter displaycan be reset by (page 37).7 Exit display control modePress the [6] ("RTN") button.External Display SwitchingSwitching the display in the External Displayconnected.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [2] button.Refer to (page 9).2 Enter display control modePress the [2] ("DISP") button.3 Enter External Display Select modePress the [5] ("OUT") button."OEM DISP" is displayed.4 Select the displayPush the Control knob to [4] or [¢].Each time the button is pressed the displayswitches.5 Exit display control modePress the [6] ("RTN") button.