Kenwood KDC-W7031 Instruction Manual

Contents

24 | EnglishTuner featuresStation Preset MemoryPutting the station in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob to [4] or [¢].3 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "[1]" — "[6]" aredisplayed above the [1] — [6] buttons.Refer to (page 9).4 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPush the Control knob to [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.• When the (page 39) isON, only RDS stations are put in the memory.• When Auto Memory Entry is done in the FM2 band,the RDS stations preset in the FM1 band aren’t put inthe memory.Likewise, when it is done in the FM3 band, RDSstations preset in FM1 or FM2 aren’t put in thememory.Preset TuningCalling up the stations in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "[1]" — "[6]" aredisplayed above the [1] — [6] buttons.Refer to (page 9).3 Call up the stationPress the desired [1] — [6] button.