Kenwood KDC-W7031 Instruction Manual

Contents

English | 155 Select the graphic/ spectrum analyzerdisplayPress the [3] ("Graph") button.6 Select the graphic/ spectrum analyzerdisplay part displayPush the Control knob to [4] or [¢].Each time the button is pressed, the graphicdisplay/ spectrum analyzer display switches asshown below.Graphic display/ Spectrum Analyzer displayMovie 1Movie 2Movie 3*1Downloaded movie*1Spectrum analyzer 1*2Spectrum analyzer 2*2Spectrum analyzer 3*2Spectrum analyzer 4 *1Spectrum analyzer 5*1Wallpaper & Downloaded Wallpaper*1• *1 Function of the KDC-W8531• *2 Function of the KDC-W8531/W7531• Downloaded movie and Downloaded Wall Paper, referto • KDC-W7031 doesn't display the Spectrum analyzer.7 Exit display control modePress the [6] ("RTN") button.• The setting of this function is available while "DisplayType A"/ "Display Type B" is selected for the Displaymode.Display Type A/ Display Type BWallpaper selectingSelect a wallpaper to display when Display Type isset to "Display Type A"/ "Display Type B".1 Select the wallpaper displayRefer to Display Switching> (page 14).2 Select the wallpaperDisplay the wallpapers one after anotherand select one1 Turn the wallpaper scan ON.Press the Control knob.Each time the knob is pressed, the Wallpaperscan is turned ON and OFF.When it’s ON, "SCAN" is displayed.When it’s ON, each wallpaper is displayed everyseveral seconds.2 At the wallpaper you want to display.Press the Control knob.Select wallpaper manually1 Turn the wallpaper scan OFF.Press the Control knob.Each time the knob is pressed, the Wallpaperscan is turned ON and OFF.2 Select the wallpaper.Push the Control knob to [FM] or [AM].Each time the knob is pushed, the Wallpaperchanges.3 Exit Display Control modePress the [6] ("RTN") button.