Kenwood KDC-W7031 Instruction Manual

Contents

48 | EnglishMUTEEXT.CONTP.CONTANT.CONT1234567812345678FRONTAUX INConnecting Wires to TerminalsTo KENWOOD disc changer/External optional accessoryBattery wire (Yellow)Ignition wire (Red)FM/AM antennainput Antenna Cord (ISO)Antenna Conversion Adaptor(ISO–JASO) (Accessory3)To connect these leads,refer to the relevantinstruction manuals.To connect the KENWOODnavigation system, consult yournavigation manual.Wiring harness(Accessory1)If no connections are made, donot let the wire come out fromthe tab.Power control/ Motor antennacontrol wire (Blue/White)TEL mute wire (Brown)Connect either to the power control terminalwhen using the optional power amplifier, or to theantenna control terminal in the vehicle.Connect to the terminal that is grounded wheneither the telephone rings or during conversation.A–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuse (10A)See page 49External amplifier control wire(Pink/ Black) To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.To External Display/Steering remoteFront right output (Red)Front left output (White)AUX right input (Red)(KDC-W8531/W7531 only)AUX left input (White)(KDC-W8531/W7531 only)ABA BSubwoofer right output(Red)KDC-W8531/W7531Rear right output(Red)Rear right output (Red)/Subwoofer right output (Red)Rear left output (White)/Subwoofer left output (White)KDC-W7031Subwoofer left output(White)Rear left output(White)