Kenwood KDC-W7031 Instruction Manual

Contents

50 | EnglishInstallation• Make sure that the unit is installed securely in place. Ifthe unit is unstable, it may malfunction (for example, thesound may skip).InstallationFirewall or metal supportScrew (M4X8)(commercially available)Self-tapping screw(commercially available)Metal mounting strap(commercially available)Bend the tabs of themounting sleeve with ascrewdriver or similar utensiland attach it in place.Screwing the Faceplate on the UnitIf you want to fasten the faceplate to the mainunit so that it does not fall off, screw in theprovided screws in the holes shown below.Accessory4Bottom panel• Never insert the screw in any other screw hole than theone specified. If you screw them in another hole, it willcontact and may cause damage to the mechanical partsinside the unit.