20 | EnglishGeneral featuresDisplay Type C/ Display Type DFont Color SelectSelecting the display font color.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [2] button.Refer to (page 9).2 Enter display control modePress the [2] ("DISP") button.3 Select the display modePress the [1] ("MODE") button.4 Select the display TypePush the Control knob to [4] or [¢].Select the "Display Type C"/"Display Type D"display.5 Enter Font Color select modePress the [4] ("COLOR") button.6 Select the text display partPush the Control knob to [FM] or [AM].The cursor ( ) moves to the selected text displaypart.Select the Font ColorPush the Control knob to [4] or [¢].7 Exit display control modePress the [6] ("RTN") button.Function of the KDC-W7031Display Type EG-Analyzer display SwitchingSwitches G-Analyzer display when the Displaytype is set to "Display Type E". (G: gravity)• Before switching G-Analyzer display, set> (page 37) and (page 37) are required to be setup.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [2] button.Refer to (page 9).2 Enter display control modePress the [2] ("DISP") button.3 Select the display modePress the [1] ("MODE") button.4 Select the display TypePush the Control knob to [4] or [¢].Select the "Display Type E" display.5 Enter G-Analyzer display select modePress the [3] ("GMENU") button.6 Select the G-Analyzer displayPush the Control knob to [4] or [¢].G-Force Sensor displayG- Graphic displayG-Meter display(Graphic)G-Meter display(Text)PointTimeG-Counter display